Product Search

For all your ceramic needs.....

Call: +61 07 3368 2877

51 Castlemaine Street,

Cesco Brush On Flowrite White Crackle Gloss Glaze B6001

Add to Wishlist
Cesco Brush On Flowrite White Crackle Gloss Glaze B6001
$ 19.90

Opaque white gloss with decorative crackle effect. Ready to use, minus 2ppm lead free brush on glaze.

Crackle glazes are not suitable for use on functional ware. The crackle pattern can be highlighted with the application of crackle ink.



When used in accordance with the manufacturer's directions, this glaze will yeild less than 2 parts per million of soluable lead and complies with permissible limits for glazed food or beverage ware.

Directions for use:

Stir well. Apply with as large a brush as possible and flow on three even coats to a thickness of approximately 1mm. Allow each coat to dry for about one minute before applying the next coat. Insufficient thickness will result in poor colour development.

Thin fresh glazes only with water if required for dipping or spraying. Care should be taken if reconstituting glazes that have dried out as glaze faults can develop in firing.

Replace lid after use ensuring rim and lid are clean so a good seal is achieved. Store in a cool dry place away from sunlight.

Product Number: CESCO BLFC6001 WHT CKLE

Technical Details